Price: 308.50 - 151.17
From the manufacturer
Premier Hot Water Recirculating Pump
Features
- Easy to install and maintenance-free
- Built-in 24 hr, three-position timer with 10 ft cord and 115v plug
- Thermal By-Pass Technology
- Can be used with all types of pipe
- Extremely quiet
- No return line required
- No electricity needed under the sink
Why install a Hot Water Pump?
The Watts Instant Hot Water Recirculating System brings convenience and savings to your home, giving you hot water instantly at every faucet or shower when you need it. This unique product connects easily to existing plumbing, saving up to 12,000 gallons of water per year.
How does it work?
This recirculating pump eliminates water waste caused by waiting for water to heat up. The device uses the pump at the water heater and a patented under-sink sensor valve to create a pressure differential. The pressure differential allows the cold and cool water in the hot water supply line to bypass into the cold water supply line at a low volume through the thermostatically controlled sensor valve, keeping the water in the hot water supply line at a “no-wait” temperature throughout the home.
Step by Step Installation Guide
|
|
|
|
|---|---|---|
Step 1 – Installing the PumpA pump with a built-in timer mounts directly on the hot water line from the water heater with 3/4″ connections. |
Step 2 – Installing the Sensor ValveA patented sensor valve opens when the water on the hot water side cools and pushes the cool water back to the water heater. As the temperature in the hot water line hits 98º, the valve closes. |
Step 3 – Installing Sensor Valve KitsIf one section of your home does not receive hot water, you will need to purchase a Watts Sensor Valve Kit for each hot water loop. For best results, the valve should be located at the faucet furthest from the water heater in each loop. |
Product Description
Product Description
The Watts Premier Extremely Quiet Instant Hot Water Recirculating Pump System pump uses a heavy-duty stainless steel pump head with aluminum pump housing, PES impeller, features high resistance to stain and corrosion, operates on 120 volts, weighs 8.5. The system includes the pump, 24hr programable timer, sensor valve with thermal actuator, 10ft power cord, adapters with rubber washers, valve mounting screws, and two 12-inch supply lines; easy installation to existing plumbing and maintenance free pounds, and measures 6.2 x 6.0 x 5.0 inches. A sensor valve opens when the water on the hot water side cools, pushes the cool water back to the water heater, and closes when hot water line hits 98º F. If multiple hot water loops are present a Watts Premier Sensor Valve Kit is needed and can be purchased separately. Pump mounts directly onto water heater, can be used with all types of pipe, and is only for indoor use on standard tank water heaters for residential buildings. This is for standard tank water heaters ONLY and cannot be used with tankless water heaters or outdoors.
From the Manufacturer
The Watts Premier hot water recirculation pump puts hot water at every tap when you want it. Saves up to 15,000 gallons per year. The pump brings convenience and savings to your home, giving you hot water instantly at every faucet, when you need it. This unique product is easy to install and not only provides you with the convenience of hot water when you need it, but saves an average of over 11,000 gallons per year. *May not work with a tankless water heater.
Reviews
There are no reviews yet.