Price: 122.99 - 151.04
[Description]:
The ROS-2210 combines reverse osmosis control and dual conductivity measurement. It is equipped with a typical process control program for the RO system. It can easily and clearly view the measurement data of the inlet water conductivity and produced water conductivity and the operating status of the RO equipment.
[Process Flow Selections]:
There are two typical operation modes for RO system (as shown in Fig.1A: Source tank supply water; and B: Tap water supply ). This instrument can operate in both modes in A and B
[specification]:
Measuring range: source water: 0 ~ 2000us / cm;
water production: 0 ~ 2000us / cm;
Matched electrode: ABS1.0 platinum black electrode, Cable length 4.5 meters; Qty: 2pcs
Power supply: AC220V ±15% 50HZ;Optional DC24V
Power consumption: ≤10W
Environmental conditions: Temperature: 5~60°C; Humidity: ≤85%RH
Accuracy: 1.5% FS;
Output: 3A/250V AC (solenoid valve and pump must be driven by intermediate relay);
Conductivity working pressure: 0~0.5 MPa;
Medium temperature: 5~60 °C;
Temperature compensation: automatic temperature compensation based on 25 °C;
Measuring distance: no more than 30m;
Display mode: full-view LCD liquid crystal display;
Dimensions: 96*96*130 mm (L *W *D)
Dial opening: 92*92mm
[Wire connection description]:
Due to the space of the controller, the design uses a small relay. When driving a large inductive load, the intermediate relay or the base paint must be used to extend the load capacity, so as to prolong the service life of the relay and reduce the failure;
[IApplication scenario]
[Full set products including]:
1)ROS-2210 controller 1pc
2)Conductivity sensor 2pcs
3)Operation manual 1pc
4)Qualified certficate 1pc
5)Conroller fixed calmp 1pair
Reviews
There are no reviews yet.