Ball Valve Electronic Automatic Watering Two Outlet Four Dials Water Timer Garden Irrigation Controller for Garden Yard

2-way outlet water timer is equal to two ordinary water timers, because you can control the timing separately, which saves you the trouble of needing multiple timers to connect to multiple faucets in your garden.

This timer includes a rain sensor function. The rain sensor tank senses rain and does not automatically water. After the water in the sensor tank is dry, continue to water according to the program.

It has the important function of automatic valve closing in weak current, when the battery power is low, it will force

Close the valve to prevent the flow of water from being on when unattended, ensuring safety.

Specification:

Name: 2-Way outlet water timer

Working voltage: 9V

Working pressure: 0.02~0.8 Mpa

Flow rate: 10~20L/min

Power supply: 9V batteries

Working temperature: 1-45℃

Characteristic: Rain sensor

Hose tap connection : 3/4" Female thread

Ingress protecion: IPX5

Package content : 1Pc x 2-Way outlet water timer

Usage of irrigation timer:

Blue L controls the left water outlet,green R control right water outlet.

Turn the knob to the setting Ll position to set the watering time of the left water outlet, theclock starts to flash, and press the plus minus key to set.

Press the arrow key to switch to select and set the minutes.Continue to press the arrow keyto set the watering time. The longest watering time is 60 minutes and the shortest is 5 seconds.Continue to press the arrow key to set the watering interval. It can be set as long as 30 days andas short as 1 day.After setting, turn the knob to the automatic position.

Manual mode, just turn the knob to manual mode.R manual means right water outlet,L manual means left water outlet.After screwing, press the arrow key switch, and rememberto turn the knob to automatic after manual pouring.

Installation Precautions:

The thread of the faucet used by many

families is too shallow and too short.The user is not familiar with the operation for the first time，and the silicone gasket will not be pressed，resulting in water leakage at the joint.If you encounter the above situation，please note that one，It is necessary to solve the phenomenonof water leakage，otherwise tap water may be poured into the machine along the thread.

Although the machine casing has a drain hole，the circuit and the battery are easily damaged by moisture for a long time.Please try to ensure that the inside of the machine is dry.

Do not use the product in the freezing season in winter.The product itself is easy to disassemble.In winter，the machine can be removed and stored.Because of the protection of the transparent cover，the product is installed vertically without fear of rain.However，the product cannot be installed upside down or horizontally，so that water can easily enter the machine through the drain.Also，if you accidentally spill tap water onto the circuit

board during installation，you must wipe dry to dry to cover the transparent cover.Note that these products will always be easy to use and will not be damaged.