Price: 1.56 - 0.99
Automatic Plant Waterer
Please refer to details of the plan, according to the following methods:
1. Remove the green hat, white porcelain head portion is completely submerged in the water, soak for 15 minutes.
2. Place the water in the brown plastic tube filled with water on the body.
3. within the green hat and plastic tubes are filled with water.
4. Place the cap back onto the green watering body and press firmly.
5. The white porcelain head part is completely inserted into the soil.
6. Connect one end of the plastic tube into the water container.
Name: Automatic Plant Waterer
Material: Ceramics And PP Plastic
Sprinkler Type: Automatic drip
Dimensions: 10.6cm X 3cm hose about 70cm
Type: Watering Kits
Working pressure: 1.0-3.0 bar
Watering Type: Automatic Watering
Package includes:
1 Pc x Automatic Plant Waterer
Please note:
When you use: It is recommended reservoir (bucket) put slightly higher pots (picture not exact)
1. Loose soil level, water absorption and the reservoir water level will directly affect the speed of water seepage.
Peat absorbent cultivation medium, automatic watering device seepage faster than compacted soil.
And relatively speaking, the higher the water level in the reservoir seepage faster. You can use according to their own actual situation to adjust the level of water in order to achieve their satisfaction with the results.
2. The plants require different degrees of water, about 15 cm pots recommendations with a plant waterer,15-20 cm 1-2 only, every 5 cm in diameter, can increase a plant waterer.
3. Can be used in light water containers of liquid fertilizer instead of water, so that the slow infiltration basin fertilizer plants better absorb.
How to solve the following problems:
1. No water absorption (because the pipe thin or no irrigation reservoir put low
so the pipe must be filled with water can not have air, put the water reservoir is slightly higher than the flowers can be.);
2. Watering too slow (try to put the water reservoir is higher, so watering speed will be faster);
3. Watering too fast, the reservoir was finished quickly (increase reservoir. Reducing the height of the reservoir
so that the reservoir is slightly higher than the height of the flowers, a water reservoir and water the flowers or the height flat, so it will not cause soil too wet)
4. If the discharge of the reservoir is high, the cover portion may be water droplets. If this happens,
lower the reservoir to just water the flowers, a bronze head to check on the lid is close, press down firmly.
Note:
It is manual measurement, there may be 1-2mm error.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Reviews
There are no reviews yet.