Price: 13.98 - 12.06
Features:
Length: 6/9/12/15/18M
The fine forms a nozzle voltex in the guide vane, and a fine hollow mist is sprayed from the orifice.
Can be widely used in plant humidification, cooling, disinfection, dust reduction, landscaping, salt spray test and other artificial fog, such nozzles is punched with the US precision drilling machine, the hole diameter is 0.4 mm, well-made, cost and Gas comparison with humidification, it saves 10 times or more.
The series of nozzles do not need air assistance, the system is simple, the spray mist is fine, the atomization is sufficient, the energy saving and water saving are low, and the effect is good; the stainless steel spray film is processed by The advanced forging process, and the durability is strong. It is 2.5 times longer than the same type of nozzle.
The nozzle can fully utilize the pressure of the tap water for atomization. The use of a high pressure water pump is less effective.
Installation steps:
1. It is recommended to install the atomization system at a height of 2.5m-3m.
2. Connect the adapter to the faucet.
3. Turn on the faucet cleaning system for 1 minute to clean the system and remove impurities.
4. Screw the discharge nozzle onto the tee fitting except the one at the end.
5. Turn on the faucet cleaning system for 2 minutes to ensure the system is completely cleaned.
6. Close the water and install the latest nozzle onto the fitting and use the end plug.
7. The atomizing pipe is fixed by a cable tie saddle clip provided.
8. Turn on the faucet until the sprayer is working and enjoying the cooling atomization system.
Package including :
6M Kit (black or white ):
※ Brass Nozzle : 6PCS
※ Nozzle holder: 6PCS
※ End Plug: 1PC
※ PE tube: 6M
※ 3/4" Adapter: 1PC
※ Faucet Adapter: 1PC
※ Tube Clip: 20 PCS
※ Tube Tie: 20 PCS
9M Kit (black or white ):
※ Brass Nozzle : 11PCS
※ Nozzle holder: 11PCS
※ End Plug: 1PC
※ PE tube: 9M
※ 3/4" Adapter: 1PC
※ Faucet Adapter: 1PC
※ Tube Clip: 30 PCS
※ Tube Tie: 30 PCS
12M Kit (black or white ):
※ Brass Nozzle : 16PCS
※ Nozzle holder: 16PCS
※ End Plug: 1PC
※ PE tube: 12M
※ 3/4" Adapter: 1PC
※ Faucet Adapter: 1PC
※ Tube Clip: 40 PCS
※ Tube Tie: 40 PCS
15M Kit (black or white ):
※ Brass Nozzle : 21PCS
※ Nozzle holder: 21PCS
※ End Plug: 1PC
※ PE tube: 15M
※ 3/4" Adapter: 1PC
※ Faucet Adapter: 1PC
※ Tube Clip: 50 PCS
※ Tube Tie: 50 PCS
18M Kit (black or white ):
※ Brass Nozzle : 26PCS
※ Nozzle holder: 26PCS
※ End Plug: 1PC
※ PE tube: 18M
※ 3/4" Adapter: 1PC
※ Faucet Adapter: 1PC
※ Tube Clip: 60 PCS
※ Tube Tie: 60 PCS
WARNING:
This misting nozzle does not have a filtering device. Please make sure that there is no debris in the water when you use it. It will be better if filtering device can be installed at the water inlet pipe. This can avoid clogging.
Shipping: Fast shipping is very important for us.
Product will be shipped within 3 days (except holidays and public vocation) after payment received.
As to the shipping ways, we will choose the best and fastest one for you according to different countries.
All of our shipping way will have the tracking number.
If you are from Russia, please leave your full name to me,thanks!!
If you choose the DHL or Fedex,The policy of each country is different, you may need to pay additional customs fees.We can't control it. If you have any other requirements. Please leave a message to me. Each buyer has the obligation to clear the customs.If the parcel can't be cleared, it will be destroyed. This will be very big loss.To avoid the loss. Please select a suitable shipping services.thank you.
Since your feedback is very important to our business development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. It will just take you 1 minute. Thank you! 🙂
If you are not satisfied with product and service, please kindly contact us before leaving any negative and neutral feedback. We will try our best to satisfy you. Thank you!
Reviews
There are no reviews yet.