Professional Farming Pruning Shears Grafting Scissor Fruit Tree Vaccination Secateurs Seedling Pruning Cutting Knife Gardening Tools
Feature:
Rootstocks and scions are easily matched to U-cut or Omega-cut for fast healing
Easy to use and fast. Grafting method saves compared to traditional
Blades can replace time and effort
Use pruning shears to cut useless branches from plants.
Specification:
Material: Carbon Steel, ABS and Aluminum
Colour: Black
Size 27cm*10cm/10.5"*3.9"
Graft adhesive width: 3cm/1.2"
(1 cm = 0.39Inches)
Cut the grafted seedlings from 5mm to 1.4cm in diameter. Trimming blade 3mm thick. Phillips screwdriver with red handle
How to use:
Step 1: Place the graft in the grafting tool, squeeze the handle to cut, repeat this step to cut the stem of the donor plant. Take care to make sure the grooves are cut at the factory.
Step 2: Slide the donor stem into the groove of the plant, matching the cutting surface as closely as possible. If the stock and donor plants are not the same size, matching can only be done on one side.
Step 3: Put the sterilized material on the seam and tie it with tape, the sterilized material can prevent bacteria and climatic conditions.
Step 4: Use pruning shears to cut useless shoots from the plant.
Step 5: The blade with "V&U&Ω" blade and the blade at both ends of the blade can be cut, one blade can be used as two blades, there are six blades in total.
Note:
Do not place on dry or old hardwoods that cannot be used by children.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Professional Farming Pruning Shears Grafting Scissor Fruit Tree Vaccination Secateurs Seedling Pruning Cutting Knife Gardening Tools
Feature:
Rootstocks and scions are easily matched to U-cut or Omega-cut for fast healing
Easy to use and fast. Grafting method saves compared to traditional
Blades can replace time and effort
Use pruning shears to cut useless branches from plants.
Specification:
Material: Carbon Steel, ABS and Aluminum
Colour: Black
Size 27cm*10cm/10.5"*3.9"
Graft adhesive width: 3cm/1.2"
(1 cm = 0.39Inches)
Cut the grafted seedlings from 5mm to 1.4cm in diameter. Trimming blade 3mm thick. Phillips screwdriver with red handle
How to use:
Step 1: Place the graft in the grafting tool, squeeze the handle to cut, repeat this step to cut the stem of the donor plant. Take care to make sure the grooves are cut at the factory.
Step 2: Slide the donor stem into the groove of the plant, matching the cutting surface as closely as possible. If the stock and donor plants are not the same size, matching can only be done on one side.
Step 3: Put the sterilized material on the seam and tie it with tape, the sterilized material can prevent bacteria and climatic conditions.
Step 4: Use pruning shears to cut useless shoots from the plant.
Step 5: The blade with "V&U&Ω" blade and the blade at both ends of the blade can be cut, one blade can be used as two blades, there are six blades in total.
Note:
Do not place on dry or old hardwoods that cannot be used by children.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Professional Farming Pruning Shears Grafting Scissor Fruit Tree Vaccination Secateurs Seedling Pruning Cutting Knife Gardening Tools
Feature:
Rootstocks and scions are easily matched to U-cut or Omega-cut for fast healing
Easy to use and fast. Grafting method saves compared to traditional
Blades can replace time and effort
Use pruning shears to cut useless branches from plants.
Specification:
Material: Carbon Steel, ABS and Aluminum
Colour: Black
Size 27cm*10cm/10.5"*3.9"
Graft adhesive width: 3cm/1.2"
(1 cm = 0.39Inches)
Cut the grafted seedlings from 5mm to 1.4cm in diameter. Trimming blade 3mm thick. Phillips screwdriver with red handle
How to use:
Step 1: Place the graft in the grafting tool, squeeze the handle to cut, repeat this step to cut the stem of the donor plant. Take care to make sure the grooves are cut at the factory.
Step 2: Slide the donor stem into the groove of the plant, matching the cutting surface as closely as possible. If the stock and donor plants are not the same size, matching can only be done on one side.
Step 3: Put the sterilized material on the seam and tie it with tape, the sterilized material can prevent bacteria and climatic conditions.
Step 4: Use pruning shears to cut useless shoots from the plant.
Step 5: The blade with "V&U&Ω" blade and the blade at both ends of the blade can be cut, one blade can be used as two blades, there are six blades in total.
Note:
Do not place on dry or old hardwoods that cannot be used by children.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Reviews
There are no reviews yet.