Price: 12.47 - 13.76

Product operation instructions

Gravity mode: Turn the button to mode 1

Flip up for 5-10-30-60 minutes and start the countdown automatically. The screen will pause when flipped up and clear to zero when flipped down

Manual mode: Move the button to mode 2

Adjustable M/S key, press the middle button ST/SP to start the countdown

Timing: 1. When the display is 00:00, short press the [SP/ST] button to start timing;

During the timing process, short press the [SP/ST] button to pause/start the countdown;

3. In a paused state, long press the [ST/SP] key to reset to zero.

Countdown setting:

1. Short press the [M/S] key to gradually increase the countdown time, long press the [M/S] key to quickly increase the countdown time. After setting, short press the [SP/ST] key to start the countdown;

During the timing process, short press the [SP/ST] button to pause/start the countdown;

3. In a paused state, long press the [SP/ST] key to reset to zero;

4. After the countdown time reaches 00:00, there will be a one minute long alarm clock (the "Didi Di" LED screen will light up/the sound will stop, and the LED screen will turn off – these two prompts are grouped in a 1-second cycle – to remind you).

Silent mode vibration reminder.

5. Memory mode: After the countdown ends, briefly press the [SP/ST] button again to display the current set time. To reset to zero, press and hold the ST/SP button. Short press to cycle through the operation again.

Specification:

Product Name: F4 Gravity Induction Timer (Charging Edition)

Product colors: black, white

Product size (MM): 44 * 44 * 46mm

Product parameters: Battery capacity: 500mAh, working temperature: 0 ° C-50 ° C, stan dby power consumption:<20uA

Sleep power consumption:<150uA, working current: 11mA, charging current: 500mA

Volume range: Mute/vibrate, 90~100dB loud, 70~80dB low

Package Included:

1pcs * Gravity Sensor Flipping Timer.

2pcs * Gravity Sensor Flipping Timer.

Note:

If the user forgets to turn off the device, or if there is no action after 5 minutes, the product will automatically go to sleep;

2. After the countdown ends, the alarm duration is 1 minute;

3. After hibernation, if the shutdown gravity mode is not toggled, it can be flipped and used immediately. The manual mode can be adjusted with just one press;

In silent mode, there is vibration feedback at the end of the timer or any operation. There is a "beep" feedback during operation in volume mode;

5. If the battery level is below 10%, the screen will flash, reminding to charge. The charging process will light up with a red light, while the fully charged green light will remain on.